Wednesday, July 15, 2020

The PEEK Performance Project Extra Part: Tips for your own HT printer

›
Tips for your own HT printer Okay, I honestly don't know why you sat through 6500 words of my rambling. Maybe you thought it was inte...
4 comments:

The PEEK Performance Project Part 5: PEEK, and redemption

›
Several months ago I was contacted by /u/Ggalisky about a a project where he had extruded PEEK filament with a Filastruder, and was looking...
1 comment:

The PEEK Performance Project Part 4: PEEK, and the problems start

›
You know, if I'm gonna be doing this thing I'll have to eat this crazy $600/kg cost at some point. I buy 250g of PEEK for $150....

The PEEK Performance Project Part 3: First Prints in Ultem!

›
The day is here! I took the package from 3DXTech that I'd been eagerly awaiting in, and threw it into the printer. I preheated th...

The PEEK Performance Project Part 2: Aiming for Ultem

›
The first high temp filament I decided to print was not PEEK, but rather Ultem 1010. Ultem is the brand name for PEI, the same stuff you pr...
3 comments:

The PEEK Performance Project Part 1: High Temp on a College Student's Budget

›
This is the story of how I raised our household's electricity bill by about $30 per month. Many people have heard of the material call...
1 comment:
Saturday, August 10, 2019

Calibrating steps/mm: the right way and the wrong way

›
For a lot of people this post is going to seem redundant, but this is a problem that should have died off years ago but still seems to be ar...